Replacing Lock on uPVC Door
To replace the lock, you need to first remove the screw holes and handle. This is typically simple to accomplish.
Then, find the screw that holds in the barrel of the lock. The screw is typically different in colour from the other screws and is located on the edge the faceplate of the lock.
Remove the Cylinder
The first step in changing the lock on a door made of upvc is to remove the old lock cylinder from the door. This is a simple procedure that can be done in about 30 minutes. All you require is a small screwdriver. You will need to find the Euro cylinder fixing screw that is typically located found on the inside of the door, right next to the lock cylinder. upvc windows locks repair is typically colored differently from the other screws and will be easy to find. Take it off and store it in a safe place.
After removing the cylinder you can then begin removing the handle. To do this, simply open the door to allow full access to the edging on the inside of the door as well as the side of the lock faceplate.
Begin with a screwdriver and remove the screw that connects the handle to the door. Once the screw is removed you should be in a position to pull the handle towards you and the rest of the mechanism will fall out of the door.
If you're having difficulty removing the handle from the door frame, you may have to unscrew it. This can be accomplished using a screwdriver or drill and you'll need be careful not to damage the screw head or cross-thread the screw.
If you're ready to replace the cylinder, make sure it's the right size for your door. Cylinders are measured using two factors: (a), the distance from the center of the Fixing Screw to the bottom of the cylinder, and (b) the distance between the hole of the keyhole and edge of the lockplate.
Remove the Handle
The good news is, the moment your upvc handle starts to become stiff, floppy or loose, it is an easy issue to fix. The cause is usually due to wear and tear of the cylinder or internal components of the multipoint lock, which are inside the door between the handle and its frame. Weather conditions, heavy use or ageing can cause upvc locks wear. This can cause problems with the locking and closing mechanisms of the door.
If the cylinder has been damaged, it can be difficult to turn the key, and the lock can become stiff, causing the handle to droop. This can be resolved by replacing the cylinder, which is an easy process. It can be done yourself, but you will need to have some knowledge about the mechanism's workings. The first step is to remove the handle that will allow you to gain access to the cylindrical and replace it with a new one.
You'll need an electric screwdriver and measuring tape to accomplish this. You must be aware of the dimensions of the cylinder you have, because it will allow you to order the correct replacement. The cylinder is the element that lets you lock your door made of upvc, and it is crucial to ensure that you get a replacement of the same size.
To remove the old cylinder, it is need to unscrew the screws which hold it in place. You should be cautious not to pull out the screws, as this could make it difficult to remove the screws in the future. Once the screws are removed, the cylinder will come out easily.
Take off the Lock Barrel
Upvc doors are constructed from strong materials and are designed to keep your home safe and secure. They are available in various designs and colors to match any decor. These doors are also thermally efficient and maintenance-free. They do not come without a few drawbacks. The locking point, also known as a barrel lock, can become faulty over time and must be replaced. It's a simple process, but you should be aware of a few things prior to beginning.
To remove the screw that is holding the lock cylinder, you will have to take off your door handle. It is typically colored differently from the rest of the screws and is situated on the edge of the door, just the keyhole. Take out this screw and put it somewhere safe. Then, slowly remove the door's outside and inside handles. Be sure to do this slowly and not too quickly as it could harm your uPVC door.
Once you have removed the handles and screws, you can use a screwdriver to remove the screws that attach them to the door frame. This will allow you better access to the pins that hold the cylinder in place. Try to wiggle and tug the cylinder to see if this will loosen it. Once it does, pull it towards you, then pull it out of the socket.
After you have removed the old cylinder lock, it is important to replace with a brand new one that includes anti-snap protection as well as anti-bump. You can do this yourself if you have the right tools or you can hire a professional locksmith to do it for you. This is an easy job that shouldn't take more than five minutes.
Install the New Cylinder
A door lock made of upvc could be damaged or broken in many ways, for instance, a tenant might have moved out but did not return the key, or the cylinder might be damaged and no longer works as it should. Whatever the reason for replacing your door lock made of upvc, it is crucial to select the right size replacement. If the wrong one is installed, your doors may be more vulnerable to the 'lock snapping method' which is responsible for 25% of burglaries.
It is crucial to choose the proper cylinder. The process is easy and takes less than five minutes. You will need a screwdriver to take off the screws that are attached to the handle faceplate and the cylinder but once this is done it's a simple task to switch them.
Make sure that you open the handle to gain access to the lock cylinder on the side of the faceplate of the handle. This will ensure that you can easily detach the lock cylinder without having to move the handle on the door to expose any internal components of the frame.
Then, remove the old cylinder and measure it. You'll need to know the length of the cylinder and the measurement of the cylinder which moves to lock or open the door. This will allow you to locate a replacement cylinder that's the same or even smaller. This is the most crucial part of the whole procedure. A cylinder should fit flush with the backplate of your handle and be no more than 5mm from it.
Install the Handle
It is not uncommon for a upvc door lock to become jammed and this can be caused by a broken part inside the case which controls the bolts that retract into the strike or keep plate. Often this can be resolved by making an Allan key adjustment beneath the hinges of the door however often this may put excessive pressure on the parts inside the centre case, so it is best to seek the help of a professional.
It is important to have quick and simple access to both sides when you are changing the handle. It is important to use the right tools. It is also recommended to prop the door open so that it doesn't close during the procedure.
First, loosen the screws that hold the handle in position with the screwdriver. Once they are loose, the handle can be removed. Once the cylinder and handle are removed, it's now time to put in the new handle. Make sure that the new handle is the correct dimension for the cylinder and hole in the center. Verify the length of the spindle on the lever that you have to determine this. Make sure that the screw fix centre on the handle is identical to the screw fix centre on your existing hole centre or cylinder.
Replacement handles from Fab and Fixed are available in a variety of designs and are made to last. They are ideal for those who wish to upgrade their upvc handles and enhance their home security. The right handle will ensure your home is safe and secure, and impossible for thieves to gain access.